How it started
My background in automotive technology and complex electrical systems actually started back in Europe, where I first learned the trade and built my foundation. I have always had a strong passion for this field. After moving here, I wanted to take my skills to the next level, so I upgraded my qualifications and earned my Michigan State Mechanic Certifications in Engine Performance, Electrical Systems, and Brakes. I eventually realized there was a huge demand for advanced, on-site diagnostics and module programming that regular shops couldn't always handle. That’s when I decided to start MB EXPERT LLC, bringing dealer-level capabilities directly to customers' driveways in Northern Michigan.
The job the phone rings for
The most common calls I get are for complex 'no-start' conditions, electrical troubleshooting, and control module programming or smart key generation when a vehicle is completely immobilized. People often call me when they need dealer-level diagnostics but can't tow the car.
My pricing is very transparent. I charge a standard $150 mobile diagnostic fee. This covers my travel to the customer's location anywhere in my service area and the first hour of hands-on labor and testing. Many issues can be pinpointed within that first hour. If the repair requires additional time, OEM replacement parts, or specific module programming/laser key cutting, I provide a clear, fixed-rate quote before doing any further work. So, a job typically starts at $150, and the final cost depends strictly on the specific repair required.

What people get wrong
A repair people always think is cheap, but isn't, is fixing a 'check engine' light based solely on a free code scan. Many people assume that reading a code tells you exactly what part to replace, expecting a quick and cheap sensor swap. But a code only points to a symptom, not the root cause. Just throwing cheap aftermarket parts at a modern car often creates more issues. The actual repair requires time for systematic electrical circuit tracing, voltage-drop testing, and using proper OEM parts to fix it right the first time.
On the other hand, people often think a 'crank no-start' with a dashboard full of warning lights means their main computer (ECU) is completely fried, which they assume will cost thousands. However, by using an oscilloscope and analyzing the wiring schematics, I frequently find that this 'expensive' catastrophic failure is actually just a single broken wire, a corroded ground, or a blown fuse. Accurate diagnostics turn an expensive nightmare into a very reasonable repair.
The one worth talking about
A recent repair I am particularly proud of involved a completely immobilized 2006 Saab 9-3. Because Saab is no longer in business, getting traditional dealer support for anti-theft and immobilizer issues is incredibly difficult. Many shops would consider the car a total loss because it couldn't be started or easily programmed through the standard diagnostic port.
Instead of letting it go to the scrapyard, I pulled the control module, brought it to my mobile workbench, and performed some intricate micro-soldering. I safely desoldered the 93LC66 EEPROM chip, read the original data, and reprogrammed it to generate new keys. Once everything was securely soldered back and reinstalled, the car fired right up. It’s a perfect example of how advanced bench work and component-level module recovery can save a vehicle.

What is on the van
van is equipped with absolutely everything necessary to conduct high-quality diagnostics and repairs according to the services my company provides. Inside my Ford Transit, I have it all—from advanced diagnostic equipment and high-voltage battery testers right down to standard screwdrivers, wrenches, and hammers.
I carry a massive inventory of hand tools, jacks, and socket sets alongside my high-tech gear. For electrical and programming work, the van is fully stocked with oscilloscopes, multimeters, circuit testers, pass-thru interfaces, and soldering equipment, all powered by a heavy-duty inverter. Whether a job requires deep electrical circuit tracing, programming a module, or just physically disassembling parts to access a wiring harness, I have the exact tool ready to go right there on the roadside
The thing everyone skips
Ignoring a weak or dying battery. Many people think they can just keep jump-starting an old battery to save a little money. However, modern vehicles rely heavily on stable voltage. A bad battery forces the alternator to work overtime and, more importantly, severe voltage drops can corrupt data in sensitive electronic control modules or trigger anti-theft immobilizer issues. A simple battery replacement can easily turn into a complex, expensive module programming job if ignored.
Where they work, and what a first call looks like
am based in Traverse City and cover a wide area across Northern Michigan, including Antrim County, Central Lake, and Vanderbilt.
When someone calls me for the first time, I listen carefully to the vehicle's symptoms. I clearly explain my transparent pricing, which includes a standard mobile diagnostic fee covering my travel to their location and the first hour of hands-on testing. If the call involves an emergency lockout or security work, I let the customer know upfront that I require physical verification of their driver's license and vehicle registration or title. Once we agree, I bring my fully equipped Ford Transit directly to their driveway.
Before you hire anyone
Always verify their credentials and specialization. Check if they are fully licensed, insured, and state-certified. If you need complex electrical work or module programming, ask if they use proper OEM software and pass-thru devices, or just a basic code reader. A true professional should be able to explain their diagnostic process—like using an oscilloscope and wiring schematics—rather than just guessing and replacing parts at your expense.
Favorite car
My favorite car to work on recently was a 2025 Lincoln Navigator. I had to replace multiple control modules, which required a lot of hands-on work, extensive adaptations, and complex programming. The vehicle is packed with an enormous amount of advanced electronics, but I truly enjoyed the entire process. Successfully handling that level of electronic complexity and getting all the new modules communicating perfectly on such a high-tech vehicle was an incredibly satisfying experience.
Interviewed by MechanicRank · November 8, 2026. Nothing here is sponsored and nothing was rewritten into marketing copy. Read the other features or tell us about your own shop.
